X seriesX series power amplifier targets at the high-end entertainment sound reinforcement， its high performance is based on its sufficient andpowerful output capacity at 8 ohms, 4 ohms, and 2 ohms. Introducing SMD technology and the AI process automation to the plug-in unit, which greatlyenhances the reliability of welding and the consistency ofthe product, which is not realized by the imitations. Making good use of Cu pin resistance to optimize the high-power and heating devices, we can improve the product’s thermo tolerant and durable performance efficiently. Meanwhile, it modifies the traditional switching distortion of Class H, making the sound come out more powerful and accurate.
Features■ Premium toroidal transformer power supply.
■ Class AB power modules(X5.5).
■ Class H power modules(X8.0/X13).
■ XLR input and SpeakON Nl4.
■ Input sensitivity selector on the back panel (0.775v / 1.0v / 1.4v).
■ Routing mode selector on the back panel (stereo / bridge / parallel).
■ HI-PASS switch on the back panel(X5.5).
■ HI-PASS/LO-PASS switch on the back panel(X8.0/13).
■ Limiter selector switch on the back panel(X8.0/13).
■ Mains circuit-breaker on the back panel(X8.0/13).
■ Channel independent protection and clip warning indicators on the front panel.
■ Channel independent power and signal presence indicators on the front panel.
|Output power: (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%)|
|8Ω stereo||550W x2||800W x2||1350W x2|
|4Ω stereo||950W x2||1280W x2||2030W x2|
|2Ω stereo||1300W x2||1700W x2||2700W x2|
|Voltage gain (8 ohm）||38.4dB||40.5dB||42.5dB|
|Output circuitry||Class AB||3 Steps Class H||3 Steps Class H|
|Cooling||Air flow from front to rear|
Mark:1、The power is tested under EIA standard.
2、*, The power is tested under the condition of 40ms burst, 1kHz sine wave and 1% THD.
3、**, The power is tested under the condition of 20ms burst, 1kHz sine wave and 1% THD.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.