SOUNDARDE series user’s manual

E series

The E series is the most cost-effective toroidal transformer power amplifier of SOUNDARD products. E series is the best choice for the economic application of sound reiforcement. E series has got the excellent performance and good sound quality with class D power amplifier module and toroidal transformer power supply. The amplifier can automatically identify and switch the voltage(220V/240V)after electrify. It is the most advanced creation of toroidal power amplifier.

Features

■ Premium toroidal transformer power supply.
■ Class D power modules.
■ XLR input and SpeakON Nl4.
■ Automatically identify and switch the voltage(220V/240V).
■ Routing mode selector on the back panel (stereo / bridge / parallel).
■ Input sensitivity selector on the back panel (0.775v/1.4v).
■ Mains circuit-breaker on the back panel (E1500).
■ Channel independent protection and clip warning indicators on the front panel.
■ Channel independent power and signal presence indicators on the front panel.

Specifications

Model E200 E400 E600 E800 E1000 E1500
Output power: (AC 220V / 50Hz. ±10%, All channels driven output power, THD=1%)
8Ω stereo 200W x2 400W x2 600W x2 800W x2 1000W x2 1500W x2
4Ω stereo 300W x2 450W x2 800W x2 1100W x2 1400W x2 2500W x2
2Ω stereo 2500W x2
8Ω bridge 600W 900W 1600W 2200W 2800W 4800W
4Ω bridge 4800W
Frequency response 20Hz-20KHz(+0/-1.5dB) 20Hz-20KHz(+0/-1.8dB)
THD+N ≤0.1%
S/N rate ≥85dB
Input sensitivity 0.775V/1.4V
Input impedance(bal/unbal) 40kΩ/20kΩ
Voltage gain (8 ohm) 34dB 37dB 39dB 40dB 41dB 43dB
Output circuitry Class D Class D Class D Class D Class D Class D
Cooling Air flow from front to rear
Product Dimension(mm) W483xL254xH89 W483xL254xH89 W483xL254xH89 W483xL254xH89 W483xL254xH89 W483xL419xH89
Packaging Dimension(mm) W560xL420xH170 W560xL420xH170 W560xL420xH170 W560xL420xH170 W560xL420xH170 W595xL565xH170
G.W. 9.1kg 10.3kg 11.4kg 11.8kg 12.1kg 20.3kg

Mark:

1、The power is tested under EIA standard.
2、*, The power is tested under the condition of 40ms burst, 1kHz sine wave and 1% THD.
3、**, The power is tested under the condition of 20ms burst, 1kHz sine wave and 1% THD.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.