CQ seriesThe new CQ is the best solution for those sound reinforcement applications requiring a multichannel amplifier with a solid and good sounding characteristic but on an affordable budget. Implementing Power Factor Correction (PFC) technology along with Universal Mains Regulated SMPS power supply and Class D power modules, the CQ series combines in the same amplifier all the functional requirements for most sound reinforcement applications.
Features■ Class D power modules.
■ Power Factor Correction technology and Universal Mains R-SMPS.
■ XLR signal input and SpeakON Nl4.
■ Input sensitivity selector on the back panel (0.775V / 1V / 32dB).
■ Routing mode selector on the back panel expect C3500Q(stereo / bridge / parallel).
■ Routing mode selector on the back panel of C3500Q (stereo / parallel).
■ Link mode selector (1-in 4-out / 2-in 4-out).
■ Channel independent protection and clip warning indicators on the front panel.
■ Channel independent power and -5dB/-10dB/-20dB/signal presence indicators on the front panel.
|Output power (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%)|
|Frequency response||20Hz-20kHz (+0/-1dB)||20Hz-20kHz (+0/-2.5dB)|
|S/N rate||≥ 98dB|
|Input sensitivity||0.775V / 1.0V / 32dB|
|Input impedance(bal/unbal)||20kΩ / 10kΩ|
|Voltage gain (8 ohm）||42dB||47dB|
|Cooling||Air flow from front to rear|
|Dimension / Weight|
|Product Dimension(mm)||483 x 306 x 89||483 x 484 x 89|
|Packaging Dimension(mm)||560 x 420 x 170||620 x 585 x 170|
Mark:1、The power is tested under EIA standard.
2、*, The power is tested under the condition of 40ms burst, 1kHz sine wave and 1% THD.
3、**, The power is tested under the condition of 20ms burst, 1kHz sine wave and 1% THD.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.